CuratOR EX5542 55″
55″ surgical widescreen monitor with 4K UHD (3840 x 2160 pixels) resolution and high brightness for endoscopy, microsurgery and other high-precision procedures.
- Exact colour rendering (BT.2020)
- HDR support
- PinP (Picture in Picture) and PbyP (Picture by Picture) display
- Auto Input Detection
If you would like to submit an inquiry or have any questions regarding this product, please complete the form below and we will get in touch with you as soon as possible.
Σύγκρινε
4K UHD Resolution and High Brightness
The monitor uses an energy-efficient LED backlight with a high brightness of 700 cd/m². The high resolution of 3840 x 2160 is four times the size of full HD and faithfully reproduces 4K endoscope and operating microscope images in Ultra High Definition.
Article: Three Reasons to Use 4K Endoscopy and Surgical Monitors
Wide Color Gamut for Distinguishing Tones
During procedures, the operating surgeon needs to be able to differentiate between varying color tones. The EX5542 supports the BT.2020 4K video color standard to ensure that subtle differences between shades of reds and yellows captured by BT.2020-supported cameras are distinguishable on the screen.
HDR Compatibility
HDR (High Dynamic Range) is a range that approximates the human perception of color and light as content is shown on a display device. The monitor is equipped with the perceptual quantization (PQ) curve and hybrid log-gamma (HLG) for supporting HDR. This ensures images from HDR-supported endoscope cameras are displayed without crushing blacks and more closely resemble the human visual system.
Fully Flat Design
Lightweight and VESA Mounting
Conventional large screen monitors often come with challenges during installation due to their heavy weight and limited range of mounting capabilities. The EX5542 boasts a weight of just 29.3 kg. This makes it much lighter compared to other monitors of this size and thus alleviating difficulty of installation and maintenance. Compliance with the VESA standard allows flexible mounting to common fixtures.
Cable Cover for Safety and Hygiene
With the attached cable cover, cable connections can be stored neatly out of sight for maintaining a high level of safety and hygiene in the operating room.
Streamlined Connectivity
With BNC (12G-SDI), and DisplayPort™ or HDMI® signal, up to 4K UHD images are displayed at 60 frames per second with a single cable over various modalities.
When connected via BNC (12G-SDI), stable transmission is achieved even over long distances of 30 meters.
Output Images Directly to Multiple Monitors
The monitor is also equipped with BNC (12G-SDI), DisplayPort™, and DVI output terminals so input video can be passed through and output directly to the next monitor. The same image is displayed on multiple monitors making information sharing among medical staff smooth in the operating room, while alleviating excess cabling.
180° Rotation and Mirroring
Regardless of the orientation of the endoscopic camera, you can rotate the displayed 3D image by 180° or mirror it to find the perfect operating angle.
This is suitable for matching the image with the line of sight of surrounding assistants and surgeons, improving convenience in the operating room.
View Two Signals on One Screen
Two different types of signal sources can be viewed simultaneously on one monitor side by side using the PbyP (Picture-by-Picture) or one displayed within an inset window over the other with the PinP (Picture-in-Picture) function. This is useful in cases where vitals or ultrasound endoscopes need to be monitored simultaneously in addition to surgical images.
Fail-Safe Signal Display
The Auto Input Detection function automatically switches to another connected input port if the selected video signal is no longer detected.
This provides a fail-safe in the case that the video signal’s input is disrupted due to a system error or other external interference.
Adjust Screens Individually
When displaying two signal sources side by side on the same screen, each image’s display mode (gamma 1.8 – 2.6 or DICOM® Preset Mode) can be adjusted independently of the other image. This is useful for viewing two different modalities simultaneously under the correct display conditions (e.g. endoscope, CT, MRI).
Safe and Stable Video Connection
Typically HDMI® cables cannot be locked into a terminal but this monitor contains a specialized locking mechanism on its side specifically for HDMI connectors. This ensures all cables can be locked onto the monitor for consistent and stable connection.
Compatibility with Wall Mount FWM6300
Wall mount for large-screen displays
Learn more about the compatibility of the wall mount FWM6300 here
Our Contribution to SDGs
As part of its corporate social responsibility (CSR) activities, EIZO is contributing towards the United Nations’ Sustainable Development Goals (SDGs).
Environmentally Conscious Product Development
EIZO’s healthcare products combine high performance and advanced functionality to meet the demands of medical environments, while also incorporating environmentally conscious features such as the use of recycled materials and low-impact components. They are optimized for energy efficiency, contributing to lower greenhouse gas (GHG) emissions.
EIZO also collects and recycles used products to further minimize environmental impact. We strive to promote efficient and circular resource use across every stage of the product lifecycle – from parts and materials procurement to manufacturing, transportation, user experience, and end-of-life disposal.
All production sites at EIZO’s headquarters in Japan operate on 100% renewable energy.
Learn more
Quality and Safety in Healthcare
In today’s medical field, efforts are underway to deliver care tailored to each individual. Under our message “Making Each Life Visual,” EIZO offers healthcare solutions that collect, connect, and utilize vast amounts of medical information. These solutions help build optimal imaging environments, supporting greater efficiency, accuracy, and safety in diagnosis and treatment.
Learn more
Specifications
General
| Model Variations | EX5542: without stand |
|---|---|
| Cabinet Color | White |
| Certifications & Standards (Please contact EIZO for the latest information) | CE / UKCA (Medical Device), ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No. 60601-1, IEC/EN 60601-1, VCCI-B, FCC-B, CAN ICES-3(B), RCM, RoHS, China RoHS, WEEE, CCC |
| Supplied Accessories (May vary by country. Please contact EIZO for details) | Cable cover, monitor attachement screws x 4, cable tie x 2, Utility Disk (Instructions for Use, Installation Manual) |
| Optional Accessories | Wall mount FWM6300 |
Panel
| Type | TFT Color-LCD Panel (IPS) |
|---|---|
| Backlight | LED |
| Size | 139.7 cm / 55″ |
| Native Resolution | 3840 x 2160 (16:9 apect ratio) |
| Viewable Image Size (H x V) | 1209.6 x 680.4 mm |
| Pixel Pitch | 0.315 x 0.315 mm |
| Display Colors | 10-bit colors (SDI): 1.07 billion colors (maximum) 8-bit colors: 16.77 million colors |
| Viewing Angles (H / V, typical) | 178° / 178° |
| Brightness (typical) | 700 cd/m² |
| Contrast Ratio (typical) | 1100:1 |
| Response Time (typical) | 8 ms (gray-to-gray) |
| Color Gamut (typical) | BT. 2020 emulation |
Video Signals
| Input Terminals | BNC (3G-SDI), BNC (12G-SDI), DVI-D, DisplayPort, HDMI |
|---|---|
| Output Terminals | BNC (12G-SDI), DVI-D, DisplayPort |
Power
| Power Input | 100 – 240 V: 50 – 60 Hz |
|---|---|
| Power Consumption | 170 W |
| Power Output | DC 5V, 2A |
Features & Functions
| Miscellaneous | Auto Input Detection, Gamma switch, color temperature switch, remote control (RS-232C) |
|---|---|
| Simultaneous Display | Picture-by-Picture (2 PbyP), Picture-in-Picture (PinP) |
| OSD Languages | English, German, French, Spanish, Italian, Swedish, Japanese, Simplified Chinese, Traditional Chinese, Russian, Portuguese |
Environmental Requirements
| Degree of Protection | IP45 (front), IP32 (rear) |
|---|
Physical Specifications
| Protective Screen | Hardness 9H, laminated glass |
|---|---|
| Net Weight | approx. 29.3 kg |
| Hole Spacing (VESA Standard) | 400 x 200 mm, M8, depth 11 – 16 mm |
Dimensions
Downloads
Brochures
The Surgical Panel SP1-654K with integrated monitor as well as build-in IT and video management components is a digital image viewing system, designed for use in the operating room. Integrated into the hospital’s IT structure, it supports various workflows. The SP1-654K provides the OR team with a perfect view also from remote locations in the operating room.
- Built-in 65” monitor (touchscreen option)
- Workstation for image viewing
- Space-saving wall mounting
- High ease of service and maintenance
- Flexible choice of material, configuration and accessories
- Completely sealed within the OR and disinfectable
AVAILABILITY: In stock
19-inch operating theatre monitor for the precise display and diagnosis of images.
- Supports different signal resolutions
- Analogue and digital signals can be connected
- Calibrated according to DICOM Part 14 standard
- Control buttons on the front of the screen
- Brightness stabilization
AVAILABILITY: In stock
A 55-inch Surgical Monitor with 4K UHD Resolution for a Centralized and Clear Display of Multiple Medical Images.
- Ideal for displaying medical images for angiography, cardiology and radiology
- Monitor calibration during production according to DICOM Part 14
- Integrated stability system for maintaining the calibration
- Designed for cost effective video management solutions
AVAILABILITY: In stock
Faithfully reproduce stereoscopic images with this 31.5-inch widescreen 3D surgical monitor.
- Optical Bonding
- High IP protection class
- Slim, fanless design
AVAILABILITY: In stock
The PDC0100 converts analog video signals into digital DVI format. This allows existing analog systems and devices that use digital signals to be combined. With a range of accessories and high interconnectivity, the converter allows maximum flexibility for integration into existing systems.
AVAILABILITY: In stock
The 58 inch viewing area of LS580W enables a new dimension in medical imaging allowing high flexibility in arranging different screen layouts. Important pictures can be scaled to the desired size, less important information can be moved out of the focus. The LS580W supports life time luminance stability. Its tone curves match DICOM/CIE recommendations. The monitor can be mounted to ceiling suspensions and is ideal for operating rooms where multiple medical images need to be displayed simultaneously.
- 58-inch LCD module with 8 megapixel (4K ultra HD) resolution.
- Environmentally-friendly LED backlight offering a maximum brightness of 700 cd/m².
- Redundant components architecture for a high degree of operational reliability.
- Factory-adjusted grayscale tones to meet DICOM Part 14 standard for optimum display of medical DICOM images.
- 5 user-selectable 11-bit look-up tables enable accurate viewing of any type of medical image.
- Homogeneous brightness uniformity across the entire screen.
AVAILABILITY: In stock
A 49-inch widescreen surgical monitor with 4K UHD (3840 x 2160 pixels) resolution and high brightness for endoscopy, microsurgery, and other high-precision procedures.
- Exact colour rendering (BT.2020)
- HDR support
- PinP and PbyP display
- Automatic input detection
AVAILABILITY: In stock
Combined with the LMM0802, LMM0804 or LMMM0802-HDM, the number of connected video sources and monitors can be increased with the Extron DMS 2000 DVI matrix switcher.
Softwareversion 4.0.0 or higher is needed to support the matrix switcher.
AVAILABILITY: In stock
Surgical monitor in 32″ widescreen format with 4K UHD (3840 x 2160 pixels) resolution and high brightness for endoscopy, microsurgery and other high-precision procedures.
- Exact colour rendering (BT.2020)
- HDR support
- PinP (Picture in Picture) and PbyP (Picture by Picture) display
- Optical Bonding
- Automatic input detection
AVAILABILITY: In stock
The LMM0802-HDM is a Large Monitor Manager for 2, 4 and 8 megapixel monitors. It gathers various video inputs and display them on the large screen. Different layouts can be arranged according to user preferences and working situation. This simplifies the surgeon’s individual workflow.
- Supports 4K/60p via HDMI and DVI Dual Link
- Small dimensions allow easy installation in existing systems
- Single and Dual Workspace supported
- Video signal is valid at the output within 6 seconds after switching on
- Long product life cycle by using long term available parts
- Maximum image latency of one frame (input to output)
AVAILABILITY: In stock