All Gather In One

Der LMM56800 bundles up different signal sources and distributes them to the connected 4K monitor. Up to 26 video signals can be displayed simultaneously. At the same time it enables you to control them from one location.

Various Image Sources

The Large Monitor Manager LMM56800 has up to 26 connections and can process digital DVI signals up to a resolution of 1920 x 1200. Additionally there are analog connections available. The supplied Y-cables split the DVI-I inputs (into DVI-D and 15-pin D-Sub connector each) so that an analogue and a digital signal can be connected at the same time.

Saving time by Optimizing Workflow

The arrangement and scaling of the data sources on the screen can be chosen freely and adapted flexibly to the work situation or the preference of the user. Different configurations (layouts) can be saved and retrieved easily and quickly later. In this way, the individual work steps can be optimally supported during surgical interventions.

High Reliability

The LMM56800 offers high functional reliability thanks to its intelligent design. It has a redundant power supply as well as a watchdog function and a flash memory.

Simple Selection of Layouts

Using a touch panel console monitor the optimum display can be selected for the current work step. Alternatively, operation is possible using the iPad or a joystick. The user interface is intuitive, making costly user training unnecessary.

Common Interface

This network interface allows available systems and PCs to be controlled automatically by the Large Monitor Manager. Layout changes, status information or remote check e.g. can directly be done from x-ray system or PC.

Rapid Availability of Video Sources

After initial configuration, the video signals are displayed on the screen within a few seconds after switching on the Large Monitor Manager. The image is transfered with a latency of one frame for one channel up to two frames. The preset layouts can be switched over with 0.5 seconds flicker-free.

Specifications

General

Cabinet Color Black
Certifications & Standards (Please contact EIZO for the latest information) CE, EN60950-1, CAN/CSA C22.2 No.60950, UL60950, EN55022-Class-B, RCM, RoHS, China RoHS, WEEE
Supplied Accessories AC power cord (us, en), converter (DisplayPort – DVI) x 2, holder for DisplayPort converter, Y-cables x 3, Utility Disk (PDF Instructions for Use)

Interface Specifications

Input Terminals Digital: HDMI connectors (DVI signals only) x 17, DVI-D x 3
Analog (high speed): D-Sub 15 pin x 3
Analog (standard): D-Sub 15 pin x 3
26 similtaneous visible inputs
Input Performance Digital: DVI-D (single link), 1920 × 1200, 60 Hz (165 MHz pixelclock), non-interlaced
Analog (high speed): 1920 x 1200, 60 Hz (170 MHz pixelclock), non-interlaced
Analog (standard): 1280 x 1024, 75 Hz (135 MHz pixelclock), non-interlaced
Output Terminals DVI-D (dual link) x 2 (via DisplayPort to DVI converter x 2)
Output Performance Output resolution: 4MP x 2 (1920 x 2160 x 2, 60 Hz)
Output format: 8MP (3840 x 2160, 60 Hz)
Communication Connector Ethernet (RJ45)

Features & Functions

Controls and Status Software control interface for layout, status and diagnosis, LED indicators for power supplies

Power

Power Requirements AC 100 – 240 V; 5 – 2.5 A; 50 – 60 Hz
Redundancy: 2 independent power supplies, hot swap capable
Maximum Power Consumption 340 W (typical)

Environmental Requirements

Degree of Protection IP20

Physical Specifications

Net Weight 18 kg (incl. converter and Y-cables)
Dimensions (mm) 19″ rack design, 4 U high

Dimensions

Downloads

Brochures

Κατηγορίες: ,
Πλοήγηση
Close

Καλάθι Αγορών

Viewed

Είδατε πρόσφατα

Close

Κατηγορίες