CuratOR LX1910 19″


19-inch high-brightness color monitor for accurate display and diagnosis in the medical environment.

Supports different signal resolutions
Connection of digital and analog signals possible
DICOM Part 14 calibrated
Brightness stability
Control buttons on the front frame


Perfect Image Reproduction

The panel technology used enables distortion-free image geometry, high contrast values, and wide viewing angles. The monitor provides flicker-free picture, even at low refresh rates for meeting even the strictest ergonomic requirements.

Display of Different Signal Resolutions

The native screen resolution is 1280 x 1024 pixels. Video signals with other resolutions, common in medical technology, are automatically adapted to the screen size. Alternatively, they can be displayed in original size (1:1).

Digital and Analog Video Inputs

The monitor is connected to a digital video source using DisplayPort or DVI-I. Analog video sources can be connected via DVI-I. The monitor automatically adjusts to display the connected analog video source. Where certain signal timings prevent this, the On Screen Display (OSD) can be used to easily adjust the settings. The supplied D-Sub – DVI and BNC – D-Sub adapters allow connection to legacy analog systems.

Consistency with DICOM Part 14 Calibration

The monitor is calibrated to meet the DICOM Part 14 standard for consistent image transmission. The five default presets contain practice-based settings. They take into account the DIN 6868-157 room classes, thereby meeting current specifications for diagnostic monitors.

Fully Automated Stability

The monitor has a fully automatic stability system that guaranties fast luminance stabilization during system start and keeps the brightness consistent. A built-in backlight sensor ensures the monitor maintains its luminance over time and compensates for fluctuations in brightness that occur during operation due to different ambient temperatures.

Installation on a VESA Mount

Compliance with the VESA standard enables attachment to existing mounting accessories like ceiling suspensions or the attachment of the stand.

Easy Access to Control Buttons

The monitor’s On Screen Display (OSD) is easily accessed via buttons on the front frame. This allows streamlined use when the monitor is mounted side by side to another screen, such as in a ceiling suspension. The OSD buttons can be locked to prevent accidental or unauthorized adjustment of the monitor.

Versatile Positioning for Improved Ergonomics

EIZO’s highly versatile stand offers tilt, swivel and a wide height adjustment range enabling you to use the monitor with greater comfort.



Model Variations LX1910: without stand
LX1910-S: with stand
Cabinet Color Black
Certifications & Standards (Please contact EIZO for the latest information) CE / UKCA (Medical Device), IEC/EN60601-1, CAN/CSA C22.2 No. 60601-1, ANSI/AAMI ES60601-1, EN60601-1-2 Class B, FCC-B, RoHS, China RoHS, WEEE, CCC, BIS
Supplied Accessories (May vary by country. Please contact EIZO for details) Adapter (D-Sub – DVI), adapter (BNC – D-Sub), Utility Disk (PDF Instructions for Use)


Type TFT Color-LCD Panel (IPS like)
Backlight LED
Size 48.3 cm / 19″
Native Resolution 1280 x 1024 (5:4 aspect ratio)
Viewable Image Size (H x V) 376.32 x 301.06 mm
Pixel Pitch 0.294 x 0.294 mm
Display Colors 8-bit colors: 16.77 million colors
Viewing Angles (H / V, typical) 178° / 178°
Brightness (typical) 700 cd/m²
Recommended Brightness for Calibration 400 cd/m²
Contrast Ratio (typical) 1000:1
Response Time (typical) 13 ms rising, 12 ms falling

Video Signals

Input Terminals DisplayPort, DVI-I (digital and analog RGBHV)
Digital Scanning Frequency (H / V) 30 – 100 kHz / 50 – 85 Hz
Analog Scanning Frequency (H / V) 30 – 100 kHz / 50 – 85 Hz
Sync Formats Sync Separate, Composite Sync and SoG


Upstream USB 2.0: Type-B
(communication between monitor and connected PC)
Downstream USB 2.0: Type-A
(communication with external devices)


Power Input AC 100 – 240 V: 50 / 60 Hz
Power Consumption Less than 45 W
Power Save Mode Less than 2 W
Power Management Digital: DVI DMPM
Analog: VESA DPM
Power Output DC 5V, 1A (Hirose)

Features & Functions

Miscellaneous Prioritised input (DVI-A) for emergency signal
Sensor Backlight Sensor
OSD Languages English, German

Environmental Requirements

Degree of Protection IP20

Physical Specifications

Net Weight LX1910: 4.3 kg
LX1910-S: 6.1 kg
Hole Spacing (VESA Standard) 100 x 100 mm, M4, depth 5-10 mm



Κατηγορίες: ,

Καλάθι Αγορών


Είδατε πρόσφατα